ANCOR recalm
Product information
This upgradeable noise-canceling product raises comfort in the driver's workplace to a new level.
ANCOR selectively reduces disturbing and harmful engine noises for humans. At the same time, acoustic signals while reversing, instructions from colleagues, radio, cell phone and radio are still audible or even better. The product meets the high protection class IP54 and resists dust, dirt and moisture.
Features
-
Active reduction of low-frequency noise inside the driver's cab
-
Preventive hearing protection and stress reduction for operators
-
User-friendly installation and operation
-
Adaptive software that distinguishes harmful noise from relevant ambient noise
-
Smartphone connectivity and control via Bluetooth
-
Quick and easy assembly
Technical Data
|
recalm-01
€3,650.00
|
||
|
Electrical data
|
||
| Condensation protection: | ||
|---|---|---|
| Interference emissions 75 - 400 MHz, BB: | 54 - 65 dB(µV/m) | |
| Interference emissions 30 - 75 MHz, BB: | 64 - 54 dB(µV/m) | |
| Operating voltage max.: | 24 V DC | |
| Interference emissions 400 - 1000 MHz, BB: | 65 dB(µV/m) | |
| Polarity reversal protection: | ||
| Short-circuit resistance: | ||
| Power consumption: | 120 W | |
| Operating voltage min.: | 8 V DC | |
| Interfaces: | 1x A2B, 1x CAN-Bus, 1x Ethernet, 1x RS232, 1x USB | |
|
Safety-related characteristics
|
||
| Current injection test (BCI) according to ISO 11452-4:2011: | Class A | |
| Immunity test against ESD according to ISO 10605:2008: | Class A | |
| Test pulses on utility services according to ISO 16750-2:2012 - Start pulse: | Class A | |
| Test pulses on utility services according to ISO 7637-2:2011 and ISO 7637-3:2007: | 1: Class C, 2a: Class A, 2b: Class C, 3a: Class A, 3b: Class A, a + b: Class A | |
| Test pulses on utility services according to ISO 16750-2:2012 - Load dump pulse: | Class C | |
|
Mechanical data
|
||
| Dimensions: | 560 x 250 x 230 mm | |
| Weight: | 3,5 kg | |
|
Environmental conditions
|
||
| Storage temperature min.: | -55 °C | |
| Deployment in earthquake zones: | ||
| Vibration resistance according to DIN EN 60068-2-64/-27 - Random vibration: | up to 2,97 g | |
| Cleanliness according to cleanroom cleanliness class: | ||
| Distance between headrest rods (centre to centre) min.: | 112 mm | |
| Vibration resistance according to DIN EN 60068-2-64/-27 - Shock vibration: | up to 25 g | |
| Operating temperature min.: | -40 °C | |
| Storage temperature max.: | 105 °C | |
| Operating temperature max.: | 70 °C | |
| Relative humidity max.: | 70 °C | |
| Distance between headrest rods (centre to centre) max.: | 193,5 mm | |
| Protection class, housing: | IP54 | |
| Diameter of headrest rods max.: | 14 mm | |
| Headrest width max.: | 30 cm | |
| Range of use frequency band: | 50 bis 500 Hz | |
| Application range sound level: | up to 100 dB(A) | |
| Overtemperature shut-off: | from 75 °C with 10 °C hysteresis | |
| Diameter of headrest rods min.: | 10 mm | |
|
Connection
|
||
| Connection supply cable: | Deutsch DT06-6S-CE 13, 6-pin | |
|
Approvals
|
||
| Certified in accordance with: | EMC Directive 2014/30/EU, EN ISO 13766-1:2018, EN ISO 14982:2009 |
recalm-01
€3,650.00
Electrical data
Condensation protection:
Interference emissions 75 - 400 MHz, BB:
54 - 65 dB(µV/m)
Interference emissions 30 - 75 MHz, BB:
64 - 54 dB(µV/m)
Operating voltage max.:
24 V DC
Interference emissions 400 - 1000 MHz, BB:
65 dB(µV/m)
Polarity reversal protection:
Short-circuit resistance:
Power consumption:
120 W
Operating voltage min.:
8 V DC
Interfaces:
1x A2B, 1x CAN-Bus, 1x Ethernet, 1x RS232, 1x USB
Safety-related characteristics
Current injection test (BCI) according to ISO 11452-4:2011:
Class A
Immunity test against ESD according to ISO 10605:2008:
Class A
Test pulses on utility services according to ISO 16750-2:2012 - Start pulse:
Class A
Test pulses on utility services according to ISO 7637-2:2011 and ISO 7637-3:2007:
1: Class C, 2a: Class A, 2b: Class C, 3a: Class A, 3b: Class A, a + b: Class A
Test pulses on utility services according to ISO 16750-2:2012 - Load dump pulse:
Class C
Mechanical data
Dimensions:
560 x 250 x 230 mm
Weight:
3,5 kg
Environmental conditions
Storage temperature min.:
-55 °C
Deployment in earthquake zones:
Vibration resistance according to DIN EN 60068-2-64/-27 - Random vibration:
up to 2,97 g
Cleanliness according to cleanroom cleanliness class:
Distance between headrest rods (centre to centre) min.:
112 mm
Vibration resistance according to DIN EN 60068-2-64/-27 - Shock vibration:
up to 25 g
Operating temperature min.:
-40 °C
Storage temperature max.:
105 °C
Operating temperature max.:
70 °C
Relative humidity max.:
70 °C
Distance between headrest rods (centre to centre) max.:
193,5 mm
Protection class, housing:
IP54
Diameter of headrest rods max.:
14 mm
Headrest width max.:
30 cm
Range of use frequency band:
50 bis 500 Hz
Application range sound level:
up to 100 dB(A)
Overtemperature shut-off:
from 75 °C with 10 °C hysteresis
Diameter of headrest rods min.:
10 mm
Connection
Connection supply cable:
Deutsch DT06-6S-CE 13, 6-pin
Approvals
Certified in accordance with:
EMC Directive 2014/30/EU, EN ISO 13766-1:2018, EN ISO 14982:2009